Let's Communicate; Channel Selection; Volume Adjustment - Midland XT5 Manual De Usuario

Let's communicate!

To turn on/off the radio
Hold down MENU/ for 3 seconds.

Channel selection

Press once the Menu button and then select the desired channel by the ▲/▼
buttons. Press PTT to confirm the selection. Remember that both radios must
be set on the same channel.
1 2
Transmission
Keep pressed the PTT button. "Tx" will blink on the display. Release the PTT
and the radio beeps to confirm to other users that your transmission has fini-
shed ( 'Roger Beep', see paragraph).
Reception
8
Simply release the PTT button. When you receive a signal "Rx" is displayed.

Volume adjustment

Press the ▲/▼ to adjust the volume at the desired level.
Keypad lock
9
This feature is very useful to avoid accidental pressure of the buttons. Press
and hold the ▼/
13
keypad lock is activated. Only PTT, the long pressure of Menu and ▼/
still be active.
11
Sending an audio signal (CALL)
12
By keeping pressed ▲/CALL for 4 seconds, you will send an audio signal to
other users on the same channel.
14
XT5 instruction guide
3
7
button for more than 3 seconds. The
4
5
6
16
10
15
17
1 2
7
confirms that the
will
| 15
3