Blackmagic Multiview Setup Home; Changing Settings Using Blackmagic Multiview Setup - Blackmagic Design MultiView Serie Manual De Instalación Y Funcionamiento

A folder called "Blackmagic MultiView" will be created within your applications folder,
containing the Blackmagic MultiView Setup application.
Blackmagic MultiView Setup Home Page
The first thing you will see after launching Blackmagic MultiView Setup is the software home
page. If you have multiple Blackmagic MultiView connected to your network, you can select
them by clicking on the arrows on the left and right side of the home page.
To access settings for your Blackmagic MultiView, click on the circular settings icon underneath
the product image, or you can click on the image itself.
Blackmagic MultiView Setup lets you change your Blackmagic MultiView
settings from a computer when connected via Ethernet or USB

Changing Settings using Blackmagic MultiView Setup

Click on the settings icon to open the setup settings for your Blackmagic MultiView. In the
settings window you will see three tabs named 'sources', 'views' and 'configure'. On Blackmagic
MultiView 4 and MultiView 4 HD, the 'views' setting is not required as views are not adjustable
via the Videohub Control software. Blackmagic MultiView 4 HD also has a 'tally' menu for
changing tally settings.
TIP Make sure your network settings on the unit matches that on your computer for
sources to be displayed.
Using Blackmagic MultiView Setup 24