Configure - Blackmagic Design MultiView Serie Manual De Instalación Y Funcionamiento

‚ SDI Tally: When your Blackmagic MultiView has an ATEM switcher's program
SDI output connected to input 16 on Blackmagic MultiView 16, or input 4 on
Blackmagic MultiView 4 models, you can view tally borders around a view when its
source is switched to air. The tally feature can be enabled by selecting the 'turn on SDI
tally' checkbox in the overlay settings. Deselect to disable the feature. An input number
can be assigned in the setup software utility so tally displays correctly.
On Blackmagic MultiView 16 and Blackmagic MultiView 4, the overlay
settings in the 'configure' tab lets you turn overlay features on or off such
as borders, view labels, audio meters, or even SDI tally borders
TIP For tally to work properly, make sure you connect all your Blackmagic
MultiView inputs so they match the input numbers on your ATEM switcher or
tally may be displayed on the wrong view.

Configure

Naming your Blackmagic MultiView
The 'Configure' tab differs between Blackmagic MultiView models.
The 'Configure' tab for a Blackmagic MultiView 16 or Blackmagic MultiView 4 has groups of
settings for 'Details', 'Overlay', and 'Network settings'. For Blackmagic MultiView 4 HD, it shows
the label and software version number and has no settings.
To name your Blackmagic MultiView 16 or Blackmagic MultiView 4 so it's easy to identify when
used remotely:
1 Click on the 'configure' tab.
2 In the 'details' setting, click the 'name' text box and enter a new label for your
Blackmagic MultiView.
3 Click 'save'.
Use Blackmagic MultiView Setup to name your Blackmagic
MultiView 16 so it's easy for network users to identify
Using Blackmagic MultiView Setup 30