ECOVACS ROBOTICS DEEBOT MINI DK560 Manual De Instrucciones página 21

No. Malfunction
DEEBOT will not
4 clean automatically
at scheduled time.
Remote Control
failure (Effective
5 control range of the
Remote Control is
5m (16').
Possible Causes
Intelligent Scheduling
function is cancelled.
DEEBOT is powered OFF.
The robot's battery is low.
The robot's Suction Intake
is blocked and/or its
components are tangled
with debris.
The battery in the Remote
Control needs to be
replaced.
DEEBOT is powered OFF
or the robot's battery is
low.
The infrared signal cannot
be transmitted because the
Infrared Emitter on Remote
Control or the Infrared
Receiver on DEEBOT is
dirty.
There is other equipment
interfering with the infrared
signal to DEEBOT.
5. Troubleshooting
Solutions
Please refer to section 3.4 Intelligent
Scheduling Function for details.
Power ON DEEBOT.
Keep DEEBOT powered ON and on
the Charging Dock to make sure it
has full battery to work at any time.
Turn the robot's power OFF, clean
the Dust Bin and invert the robot.
Clean the robot's Suction Intake and
Side Brushes.
Replace with a new battery making
sure it is installed correctly.
Make sure DEEBOT is powered ON
and fully charged.
Use clean dry cloth to wipe the
Infrared Emitter on Remote Control
and the Infrared Receiver on
DEEBOT.
Avoid using the Remote Control
near other equipment using infrared
signals.
19
EN