Battery Status - Blackmagic Design Video Assist Manual De Instalación Y Funcionamiento

Last Clip Regen
By selecting 'last clip regen' for your timecode input, each file will start one frame after the
last frame of the previous clip. For example, if your first clip ends on 10:28:30:10, the next clip
timecode will start at 10:28:30:11.
Preset
Preset uses the timecode entered under the 'timecode preset' option.
Timecode Preference
For NTSC sources at frame rates of 29.97 or 59.94, you can select 'drop frame' or 'non-drop
frame' recording. If you are not sure whether your video is drop frame or non-drop frame, tap on
default. This will maintain the standard of the input, or default to drop frame if there is no
valid timecode.
Timecode Preset
You can set your timecode manually by tapping on the pencil icon and entering the start time
code via the touchscreen keypad.
Timecode Output
You can select your timecode output from two options. This also selects your timecode view in
the upper toolbar.
Timeline
Tap the timeline option to output your timeline timecode.
Clip
The clip option will output the timecode of your clip.
HDR
Blackmagic Video Assist 12G HDR's ultra bright display is perfect for HDR workflows. The wide
color gamut displays 100% of the DCI-P3 color space and brightness controls let you work even
outside in bright sunlight.
If you are recording or playing HDR content, 'HDR' will appear to the right of the timecode
display. The HDR information will be tagged on the SDI and HDMI output connectors so you
can connect an HDR enabled device, such as an HDR television, to view the full gamut on a
larger display.
When recording .mov files in Apple ProRes or DNxHR, the HDR information will be included in
the metadata of the file.
Source
Displays the selected SDI or HDMI input source. To select your source, tap on the source icon
to open the source settings and select SDI or HDMI.

Battery Status

The battery status indicator displays the amount of power remaining in your batteries. Tap the
battery icon to open a larger display with more precise information about your battery levels.
TIP When using 12V power instead of batteries on the 12G models, 'AC' will appear in
place of the battery icons.
Changing Settings 22