Maintenance; Handlebar - Vertigo Motors BUSTO replica Manual De Propietario

MAINTENANCE

MAINTENANCE
A

HANDLEBAR

Adjusting the inclination of the handlebar the inclination of the handlebar so that is best suits
your style of riding.
- Loosen the 4 bolts (A).
- Place the handlebar in the position that is most suitable for
you.
- Re-tighten the 4 bolts (A).
Ensure the handlebar are centred before tightening the bolts.
Tighten the four bolts cross-wise and equally.
We recommend you adjust the controls on the handlebars.
Adjusting the handlebar distance. the handlebar distance.
The handlebar clamps have 4 different positions to adapt accor-
ding to your requirements.
Inverting the position of the handlebar clamps can either bring
the handlebar closer or move them further away.
Modifying the handlebar clamps anchor to the plate with two po-
sitions available allows you to move the handlebar closer or fur-
ther away.
Make sure that the bolts are tightened to the torque shown
in the tightening table to avoid any possible accidents.
50 50