Vertigo Motors BUSTO replica Manual De Propietario página 62

MAINTENANCE MAINTENANCE
C
D
- Low speed compression adjustment (C) Low speed compression adjustment (C)
The low speed compression setting allows you to modify the com-
pression damping at low speed. This has nothing to do with your
driving speed but with the speed of the shock absorber. This ad-
juster has about 20 clicks.
Completely clockwise is the starting point. With this adjustment,
you can make your bike more stable by closing the adjuster or
gain some traction by opening it.
With a fully open low speed adjuster, your bike will feel smooth
and absorb little bumps very well, but it will also be a little less
stable.
To jump on the rear wheel more or less, it is better to do it with
a tighter adjuster and low speed damping.
- Rebound adjustment (D) Rebound adjustment (D)
The rebound adjustment has 50 clicks and is located on the top
of the shock. It is adjustable by means of a fl at screwdriver. Tur-
ning the screw clockwise will achieve more stability but will lose
traction, if you want to gain traction you must turn the screw
counterclockwise.
The shock absorber equips a tared spring for 75N / mm for riders about
75-80kg.
Handle the adjustment screws carefully. If the limit of adjustment is exceeded, severe
damage can be caused to the shock absorber. Remember to make a note of the number
of clicks if the adjustment is changed, so that the standard adjustment
can be returned to if necessary.
62 62