Shock Absorber - Vertigo Motors BUSTO replica Manual De Propietario

MAINTENANCE MAINTENANCE
A
B

SHOCK ABSORBER

The REIGER rear shock absorber allows 4 different types of adjust-
ments:
- Spring preload adjustment (A) Spring preload adjustment (A)
The shock absorber incorporates two rings that allow modifying
the spring preload, one to determine the position and the other
to fi x it.
- High speed compression adjustment (B) High speed compression adjustment (B)
Access to the adjusting wheel is located at the bottom front of
the swingarm.
This setting has approximately 15 clicks, fully closed clockwise is
its starting point and the most rigid confi guration.
By turning it counterclockwise, the damper will feel smoother on
landings and the ride between stones and holes will be smoother.
The shock absorber is adjusted for a weight
of between 70 and 80 kgs.
61 61