Complete Stop; Warnings - GRE VISIOPOOL Manual De Instrucciones

Complete stop*

If you wish to stop your Gre By VISIOPOOL® alarm, despite the risk of interrupting the
surveillance, turn the key to the OFF position and remove it from the keyhole.
Keep it in a safe place that is easy to remember (on a hook in your pool house, for
example).
If the alarm is to be deactivated for an extended period, you are advised to remove
the batteries and store them in a cool, dry place.
To restart your Gre By VISIOPOOL® alarm, proceed from point 1 of these instructions.
If you have any problems, get in touch with your vendor immediately, or ACIS.
*Attention : in accordance with regulation 2003-9 on pool safety, we remind you that
this device "must be installed and fastened permanently, all year round". In the event
of drowning while your Gre By VISIOPOOL® is at a complete stop for whatever reason,
neither your vendor nor the manufacturer can be held liable for the accident.

Warnings:

FROST – Beware: Your Gre By VISIOPOOL® system will not function if there is water
frost inside the sensor, or if the surface of the pool water is frozen. In case of doubt
as to the solid or liquid state of the water inside the tube, carry out a functional
alarm test.
COMPETENCE FOR INTERVENTIONS – With regard to servicing and maintenance of
this appliance, the only intervention the user is authorized to perform is change the
batteries. For any other intervention, contact your vendor or ACIS.
CHECKS – Verify the proper function of your Gre By VISIOPOOL® regularly by
carrying out the triggering tests described in the instructions.
Note the results of these tests on the designated sheet in these instructions.
In the case of malfunction, protect your pool against access, immediately inform
your vendor, or ACIS if preferred, and have the repair procedure initiated.
A test sheet is provided on page 16 of these instructions.
Page 12
Alarm for swimming pool GRE by VisioPool® - Instruction manual- User Manual December 2016