dirna Bergstrom bycool SLIM FIT Instrucciones De Montaje página 18

SLIM FIT
EN
6
Screw (2) M6 L=49 hexagons on the rear of the
unit (direction of travel) with rubber washer and flat
washer, and tighten with a torque of 4.75±10% Nm.
7
Screw (2) M6 L=87 hexagons on the rear of the
unit (direction of travel) with rubber washer and flat
washer, and tighten with a torque of 4.75±10% Nm.
8 Position the console and align the unit. The
grooves in the base must be checked to ensure
they are not visible and are supported on the
EPDM seal.
8
6
7
8
18
®