Control Board - Futurelight PHS-1200E Pro-Head-Spot Manual Del Usuario

Control Board

The Control Board offers several features: you can simply set the starting address, switch on and off the
lamp, run the pre-programmed program or make a reset.
The main menu is accessed by pressing Mode/Esc until the display is lit. Browse through the menu by
turning the encoder. Press Enter in order to select the desired menu. You can change the selection by
turning the encoder. Press Enter in order to confirm. You can leave every mode by pressing Mode/Esc-. The
functions provided are described in the following sections.
Default settings shaded.
Main menu
Set DMX address
Value display
Function
Set to Slave
Mode
Auto program
Music control
Time information
Temp. info.
Product info.
Software version
Lamp on or off
Lamp on by power
on
Lamp on via DMX
Lamp off via DMX
Lamp off if no
DMX
Lamp on at temp.
Lamp off at temp.
Sub menu
A001~ AXXX
PAN Moving ...
Slave 1, Slave 2,
Slave 3
Master/Alone
Master/Alone
Individual run time
Total run time
Total lamp on time
Lamp off time
Clear lamp time
Total fans clear t.
Clear fans clear t.
Fans clear t. setup
Base Temp
Near lamp Temp
Unit model
Company WEB
Company Tel
Display ... Ver. 1.0 ...
ON/OFF
ON/OFF
ON/OFF
ON/OFF
OFF, OFF~19M
45 °C, 20-79C
130 °C, 80-139C
55/130
Display
XXXX (hours)
XXXX (hours)
XXXX (hours)
XXXX (minutes)
ON/OFF
XXXX (days)
ON/OFF
OFF/250 (days)
XX° C
XXX° C
00026924.DOC; Version 1.6
Function
DMX address setting
DMX value display
Slave setting
Auto program
Music control
Individual fixture
running time
Fixture running time
Lamp running time
Lamp off time
Clear lamp time
Fan operating days
since last cleaning
Clear fan operating
days
Select fan maintenance
interval
Ambient temperature
Inside temperature
Unit model
Company WEB
Company Tel
Software version of
each IC
Lamp on/off
Lamp on/off / Power
Lamp on via DMX
Lamp off via DMX
Lamp off if no DMX
Lamp restart at temp.
Lamp off at temp.