Charging Instructions - HQ CHARGER83 Manual De Uso

Specifications
• Specially designed with LCD battery indicator & discharge function.
• The discharge function reduces memory effect and enables full discharges for a longer battery
lifetime.
• Powered by a supplied switch mode adapter (100-240 V AC) for worldwide use.
• Recharges 1 - 4 pieces of AA/AAA/C/D Ni-MH batteries or 1 - 2 pieces of 9 V cells (Ni-MH)
simultaneously.
• Intelligent microprocessor controller – battery life is well protected by negative delta V cut-off
function and timer protection.
• Defective and non-rechargeable battery detection.
• Automatic charging current selection for AA/AAA/C/D/9 V batteries.
• Built-in 5 V USB output port (output: 5 V DC 500 mA) on the rear of the charger, designed to charge
and power up your digital device**(see USB function).
• LCD display and blue backlight color with:
o Battery capacity indication
o Battery charge/discharging status indication
o USB function indication
o Battery status indication
• When the batteries are fully charged, the charger will change to trickle mode automatically and the
blue color "backlight" will go off after 2.5 hours.
• A "backlight button" is incorporated to turn on the backlight for 10 seconds during night time.
Battery status indicator

Charging Instructions

1. Insert 1 to 4 pieces of AA/AAA/C/D or 1 to 2 pieces of 9V cell rechargeable Ni-MH batteries into the
battery compartment.
2. Make sure you insert the batteries according to the indicated polarity. The charger will adjust the
suitable charging current for AA/AAA/C/D/9V battery automatically.
3. Connect the supplied AC adapter's barrel plug into the jack on the back of the charger. Plug the AC
adaptor into the AC wall socket.
Caution: The supplied AC adapter supplies 12 V DC and delivers 1000 mA and its plug fits into the
charger's DC input jack. Using an adapter that does not meet these specifications could damage the
charger or the adapter.
1. The LCD will indicate the charging status and the word "Charging" will be displayed (the blue
backlight will light up during the charging process and turn off once the batteries are fully charged).
2. After the batteries are fully charged, the word "FULL" on the LCD screen indicates that the batteries
are ready to use.
ENGLISH
Battery capacity indicator
Battery capacity indicator 4 icons
USB function indicator
2
2 icons for 9v
for AA/AAA/C/D