Warranty And Liability - Ega Master 79921 Manual De Instrucciones

After underwater work
• Clean the machine thoroughly
• Dry the machine by blowing it with compressed air
• Spraying of all moving parts with spray OKS 8601 (or similar)
For additional information look at the specific operation and maintenance instruction. For a long life we recommend
regular (3-monthly) general overhaul by the manufacturer.
SYMBOL DEFINITION FOR SAFETY EQUIPMENT AND ACCIDENT PREVENTION
Read operating instruction booklet/ safety instructions!
Before working on or with the tool, read the safety instructions and follow the instructions during
operation.
Use eye protection or wear safety goggles!
This not only applies to the operator, but also to any other person within the vicinity of the machine.
Wear hearing protection!
This not only applies to the operator, but also to any other person within the vicinity of the machine.
Wear protective work shoes!
Wearing open sandals or damaged/ unsuitable footwear can result in injuries.
Only wear proper footwear which is suitable for the requirement of the workplace.
Wear protective gloves!
Defective/ improper gloves may lead to injury. Only wear proper hand protection appropriate for the
requirements of your application.
Unless otherwise specified, our „General Sales Terms" apply.
Warranty and liability claims in regards to persons or equipment damages are invalid, if one or several of the
following causes apply:
• Use of the equipment in a non-designated application.
• Improper assembly, start- up, operation or maintenance of the machine.
• Operation of the machine with defect safety devices or improperly fixed or non-functioning safety and protection
devices.
• Non-observance of the instructions in the operating instruction booklet concerning transport, storage, assembly,
startup, operation, maintenance and setting up of the machine.
• Independent structural alterations or settings on the machine beyond the intended purpose.
• Inadequate supervision of wear parts.
• Improperly carried out repairs, inspections or maintenance.
• Catastrophic cases because of a war, acts of god or other reasons which are beyond our control.
Generally, the machine operator is responsible for correct conditions/ operation of the machine and adherence to the
safety regulations. The machine is built according to the level of technology and recognized technical safety regulations.
20

WARRANTY AND LIABILITY

OWNER OBLIGATIONS