Ega Master 79921 Manual De Instrucciones página 22

Before each operation, make visual check of the machine and machine tools, as well as accessories with regard to
integrity and appropriateness for the application.
Never operate the machine if one or more parts (e. g. machine tools, cables, lines) are damaged, if it is not working
properly, if any damages can be identified or are to be suspected (e. g. after it has been dropped). Replace damaged parts
immediately.
Never remove protective devices from the machines where fitted and ensure they are in good condition and properly
adjusted before starting the machine.
A malfunction, which impairs operator safety, must be immediately removed.
Pay attention that the machine is cleaned from dust and deposits of rust particles and other deposits before and after
the work.
SAFETY INSTRUCTIONS FOR PREVENTION OF WORKPLACE HAZARDS
WARNING - The following applies unless otherwise stated in the machine's operating
instructions booklet:
The machine is not insulated to protect against an electrical power surge.
CAUTION – risk of injury! - Hands may be crushed, seized or otherwise injured.
Keep your hands away from areas which are marked with this symbol.
Caution – risk of injury! - Remove all sources of danger which could lead to slipping, tripping or
falling (e.g. slippery surface, hoses, cables).
Keep the work area clean and dry.
PROHIBITION - Eating, drinking and smoking are forbidden during operation.
ATTENTION – risk of explosion! - Operate the machine according to the intended use only. The
machine is not applicative in explosive atmospheres. Consider the following:
• The generation of sparks is typical for grinding work.
• Nearby workplaces should always be protected against flying sparks, e. g. partitions or curtains.
• Flammable and explosive material has to be removed from the work area before work is started.
• Among others, this relates to dust deposits, cardboard, packing material, textile, wood and
wooden splints, but also flammable fluids and gas.
Make sure there is adequate lighting.
Be extra careful in unfamiliar surroundings. There is a risk of hidden hazards such as electric lines or other supply
lines.
Make sure when operating the machine that no electrical cables, gas pipes or similar could be damaged.
Use suitable and personal protective equipment.
SAFETY INSTRUCTIONS FOR PREVENTION OF HAZARDS CAUSED BY HYDRAULIC
WARNING - Hydraulic can cause severe injury.
Before working on the tools (e.g. installation, changing accessories or machine tools, prior to a
long standstill, maintenance, etc.) disconnect equipment from hydraulic supply (close stop valve).
WARNING - Risk of injury by a whipping hydraulic hose.
Check hydraulic hoses, connection components and fittings regularly for any damages and proper fixture.
22