Topcom 2000 Manual De Usuario página 12

Wireless IP Cam 2000 / Wired IP Cam 1000
5.1 System
• Camera name: by default the last digits of the MAC address are used in the camera
name. This name can be changed.
• Location: You can enter the name of the location where you have installed the IP Cam.
• Admin: Admin ID / password are by default admin / admin. If you want you can change
the administrators login.
• LED Control: Normal, OFF or Dummy
– Click Save to save the settings.
5.2 Video
• In this screen all video settings can be set. Please make sure that the Light Frequency
is set at your mains frequency.
– Click Save to save the settings.
12 Wireless IP Cam 2000 / Wired IP Cam 1000