Topcom 2000 Manual De Usuario página 8

Wireless IP Cam 2000 / Wired IP Cam 1000
Now a login screen will appear:
By default, the username and password are both admin.
– Click OK to continue.
Now you can change IP CAM's IP address, Subnet Mask and Gateway.
Please make sure that the new IP address will be in the same subnet as your LAN network.
The Gateway should be the IP address of your Internet router.
If the IP Cam is not in the same subnet, it is not possible to access the web interface and you
will not be able to see the images !
– Click OK to proceed.
The Camera will restart now.
Click
8
to find the IP CAM with the new IP address.
Wireless IP Cam 2000 / Wired IP Cam 1000