Singing Machine STVG890BTBK Manual De Instrucciones página 10

Operation
Using a Bluetooth Device (Continued)
888
U
V
al
888
at
5
To control your Bluetooth device from
this unit, press the Play/Pause4 ;
button to start playback. Press
the Play/Pause4 ; button during
playback to pause the song.
y
6
Adjust the volume to a comfortable
level using the MASTER VOLUME
control on this unit as well as the
volume on your Bluetooth device.
7
Connect microphone(s) and slide the
ON/OFF switch on the microphone to
the ON position.
8
Adjust the MIC VOLUME control
as desired. Increasing this control
will increase the volume of both
microphones.
9
Rotate the ECHO control to add an
echo effect to your voice. Rotate
towards MAX to increase the echo
effect.
X
W
10
Adjust the balance between the
ak
speakers using the BALANCE control.
11
SKIP: Advance or go back one track
by pressing the Skip Back 9/Skip
Forward : buttons.
12
Press the STANDBY button to turn
the unit off.
16
Operation
Using the LINE IN Jack (Guitar or Keyboard)
GUITAR
/KEYBOARD
v
888
y
1
Connect the unit as described
previously.
GUITAR/KEYBOARD: Connect the
Guitar or Keyboard to the GUITAR/
KEYBOARD Ext. Input jack.
LINE IN: Connect a music player using
a 3.5mm standard audio cable from
the external unit's Audio Output/
Headphone jack to the unit LINE IN Ext.
Input jack.
2
Press the STANDBY button to turn
the unit on.
3
Repeatedly press the FUNCTION
button to select the LINE IN mode;
"AU" will display and ' "LINE IN" will
appear on the monitor.
w
4
Connect the external unit to the
LINE IN Jack on the front of this unit.
Connecting an external unit will allow
the audio to be played through your
Singing Machine.
Notes:
• It is highly recommended to set the volume
on the auxiliary unit to 1/3 or lower to avoid
distortion.
• Skipping files/tracks is not possible on this
unit when using an external device.
5
Adjust the volume using the MASTER
VOLUME control on this unit or your
external device's volume control.
17