OEM PRATICO C641 Manual De Uso Y Mantenimiento página 71

PRATICO
C641 - C642 - C643
Maintenance
6.1.d.c - Door spring replacement (Fig. 5)
DANGER
This operation shall be carried out by skilled
technicians.
• Remove the right-hand panel (1) by unscrewing the
relevant screws.
• Remove the control board (2) by unscrewing the
relevant screws.
• Release the spring (3) and replace it.
• Insert the spring (3) in the pin (4), turn the spring
rewinding it up, then fasten the spring catch (5) in
the milling (6) of the pin (4).
• Reassemble the panel (1) and (2).
FIG. 5
2
1
EN - 29