General Warnings - OEM PRATICO C641 Manual De Uso Y Mantenimiento

PRATICO
C641 - C642 - C643
General specifications and warning
Chapter 1

1.1 - GENERAL WARNINGS

- Before starting the oven, user shall carefully
read this handbook and be aware of both
technical specifications and control elements.
- User should be trained in the use of the
oven.
- Before installing the oven, make sure the area
the latter shall be placed in is compatible with
oven overall dimensions and weight.
- In case of installation or removal of oven
parts, only means of lifting & handling be-
ing suitable for both weight and geometric
characteristics of the part to be lifted/handled
shall be utilized.
- This appliance is not intended for use by
person (including children) with reduced
physical,sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or instruc-
tion concerning use of the appliance by a
person responsible for their safety.
- Mechanical and electric parts being inside
the oven are protected by panels which are
totally closed by means of screws.
- Before carrying out cleaning and/or mainte-
nance operations as well as removing any
protection, make sure the cutout switch is
on "OFF" (O), in order to disconnect power
supply to the oven during user's operation.
- Buyer's power supply system shall be
equipped with an automatic release system
on the upper side of the oven cutout switch
and also with an earthing system comply-
ing with all accident prevention protection
requirements.
- In case of repairs to be done on the main
switch or in the main switch area, turn off the
power of the electrical line.
- Any inspection and maintenance works re-
quiring the removal of the safety protections
are made under the responsibility of the user.
Therefore it is recommended that the
above mentioned works are done by au-
thorized and skilled personnel only.
- Make sure that all safety devices (barriers,
protections, carter, micro-switches, etc.) have
not been tampered and are perfectly working.
On the contrary, they should be repaired.
- Do not remove the safety devices.
- In order to avoid personal risks, only suitable
tools should be used, in accordance with the
local safety regulations.
- Do not tamper the electric and pneumatic
plant or any other mechanism for any reason.
- The oven shall not be left unguarded.
- Wear safety clothing only, approved by the
law in force.
- In case of works to be done in a position that
cannot be reached from the ground, use safe
ladders or lifting devices only, in conformity
with the local safety regulations.
- In case of repairs to be carried out near or
under the oven, make sure:
• there are no elements which can be started
and/or there are no unstable parts on or near
the oven.
- To carry out operations on the oven, do not
use your hands, but only appropriate tools.
- Do not use your hands or other tools to stop
any moving parts.
- Do not use household matches, lighters or
free flames near the oven.
EN - 3