Labelling / Safety Marks - WIKA GFU08 Manual De Instrucciones

2. Safety
■
■
EN
■

2.11 Labelling / Safety marks

Product label model GFU08-B:
Model GFU08-W filling cart: Filling cart with scales
Model GFU08-E: Filling cart with vacuum pump
Model GFU08-C: Filling cart with scales and vacuum pump
14
To accelerate the filling process from the SF
cylinder can be heated up. Only use an appropriate cylinder heater.
To check the leak tightness of the cylinder connection, an SF
detector, e.g. model GIR-10, should be used at regular intervals
For the models GFU08-E and GFU08-C, an appropriate vacuum pump
oil (see operating instructions of the vacuum pump) must be stocked
up in order to maintain the required oil level by filling it up, if necessary.
WIKA operating instructions SF
gas cylinder, the SF
6
gas leak
6
Date of manufacture
Date of manufacture
Date of manufacture
gas filling cart, model GFU08
6
gas
6