Technical Restrictions; Responsibility Of The Operator - WIKA GFU08 Manual De Instrucciones

2. Safety
SF gas filling cart with scales (model GFU08-W or GFU08-C):
6
Handle electronic components with the required care (protect from humidity, impacts,
■
strong magnetic fields, static electricity and extreme temperatures, do not insert any
objects into the instrument or its openings). Plugs and sockets must be protected
from contamination.
If the instrument is transported from a cold into a warm environment, the formation
■
of condensation may result in instrument malfunction. Before putting it back into
operation, wait for the instrument temperature and the room temperature to equalise.
The technical specifications contained in these operating instructions must be
observed. Improper handling or operation of the instrument outside of its technical
specifications requires the instrument to be taken out of service immediately and
inspected by an authorised WIKA service engineer.Unauthorised alterations by the
operator are not permitted, especially on safety devices. Unauthorised alterations could
result in the improper functioning of safety equipment and result in life-threatening
situations.
WIKA is not liable for changes made by persons who have not been authorised by WIKA.
The manufacturer shall not be liable for claims of any type based on operation contrary
to the intended use.

Technical restrictions

The technical specifications contained in these operating instructions must be
observed. Improper handling or operation of the instrument outside of its technical
specifications requires the instrument to be taken out of service immediately and
inspected by an authorised WIKA service engineer.Technical specifications:
→ Siehe Kapitel 3 "Specifications".

2.4 Responsibility of the operator

The instrument is used in the industrial sector. The operator is therefore responsible for
legal obligations regarding safety at work.
The safety instructions within these operating instructions, as well as the safety, accident
prevention and environmental protection regulations for the application area must be
maintained.
The operator is obliged to maintain the product label in a legible condition.
To ensure safe working on the instrument, the operating company must ensure
that suitable first-aid equipment is available and aid is provided whenever required.
■
that the operating personnel are regularly instructed in all topics regarding work
■
safety, first aid and environmental protection and know the operating instructions and
in particular, the safety instructions contained therein.
that the instrument is suitable for the particular application in accordance with its
■
intended use.
that personal protective equipment is available.
■
WIKA operating instructions SF gas filling cart, model GFU08
6
EN
7