Design And Function; Scope Of Delivery - WIKA GFU08 Manual De Instrucciones

4. Design and function

4. Design and function
4.1 Description
The GFU08 series of robust and modular gas cylinder transport carts are used for
EN
the filling and refilling of SF
design enables worldwide application through the various mechanical and electrical
connections.
The model range is split into 4 versions:
Model GFU08-B: Filling cart
■
Model GFU08-W: Filling cart with scales
■
Model GFU08-E: Filling cart with vacuum pump
■
Model GFU08-C: Filling cart with scales and vacuum pump
■
Models GFU08-E and GFU08-C are fitted with vacuum pumps. With these, the air is
extracted from the SF
filling can be made. The 10 m³/h vacuum pump, built into the models GFU08-E and
GFU08-C as standard, enables a fast evacuation down to < 0.02 mbar (0.015 Torr).
For larger volumes, suction of up to 40 m³/h is available as an option. With 2-stage
pumps, the final pressure can be reduced as far as 2 x 10
too high humidity or air concentration in the SF
consideration.With the models GFU08-W and GFU08-C, gas cylinder scales are built
in, which enable the exact determination of the amount of SF
gas filling cart is an ideal tool for using the mass-balance method in accordance with the
IPCC directive for the preparation of emission reports.The special, flat design of the load
cell under the gas cylinder allows easy loading and unloading of the heavy cylinder by
only one person.

4.2 Scope of delivery

Cross-check scope of delivery with delivery note.
18
gas in the required gas compartment. The modular
6
gas compartments so that, afterwards, a professional SF
6
WIKA operating instructions SF
mbar. The risk of either
-3
gas compartment is therefore not a
6
gas filled. Thus, the SF
6
gas filling cart, model GFU08
6
gas
6
6