WIKA GFU08 Manual De Instrucciones página 26

7. Display unit
7.1.3 Automatic zero setting on start
If, during the start, a weight of ± 10 % of the nominal load/weighing capacity is
determined, an automatic zero setting is carried out. If the weight lies outside of this
range, the display on the display unit shows the current weight after a few moments.
EN
7.1.4 Keylock
In order to prevent unwanted entries, the buttons of the display unit can be locked. The
settings for the keylock are made in SETUP.
Automatic keylock
The keypad will be locked after 15 seconds of inactivity in the weighing status (the
display indicates "LoC.key").
Functions with keylock:
Switch the display unit off by pressing the C button for 10 seconds. Switches the
■
display unit back on.
Unlocking the keypad: Press the ZERO and ENTER/PRINT buttons one after the
■
other. (Display shows the message "unl.key"). By pressing any other button, the
display shows the message "Press Zero to unlock". By pressing the ZERO
button, the display shows the message "now Press Print to unlock".
Keylock via optional input
The keypad will be locked on closing the input and only unlocked again after opening it.
The display shows no message on locking/unlocking. If a button is pressed, the display
shows the message "LoCkin".
7.2 Switching the display unit on
To switch the display unit on, press the C button until the display unit switches on.
Release the button.
Indication on the display after switching on:
Step Display
1
HH.YY
2
3
NAH HHH.HHH
or
Naster
or
ripE
4
bt HHH
5
26
Description
Indicates the installed software version.
Indicates all segments and symbols in the display.
Weighing capacity of channel 1.
by selecting the function range
by selecting the function range
Indicates the charge status of the battery -
a number from 0 to 100.
Display of weighing capacity and scale divisions.
WIKA operating instructions SF
" "
.
Nastr
" ".
rEpE
" "
corresponds to
H
gas filling cart, model GFU08
6