Descargar Imprimir esta página

Hansgrohe Carlton 17230 Serie Modo De Empleo/Instrucciones De Montaje página 4

Ocultar thumbs Ver también para Carlton 17230 Serie:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 6
6 6
6Safety6Notes
6 Gloves should be worn during installation to prevent
crushing and cutting injuries.
6 The shower system may only be used for bathing,
hygienic and body cleansing purposes.
6 The hot and cold supplies must be of equal pressu-
res.
Installation6Instructions
• The fitting must be installed, flushed and tested after
the valid norms.
• If the instantaneous water heater causes problems or
if you wish to increase the water flow, the EcoSmart
(flow limiter) located behind the aerator can be
removed.
Technical6Data
This6mixer6series-produced6with6EcoSmart
limiter)
Operating pressure:
Recommended operating pressure:
Test pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Recommended hot water temp.:
Hansgrohe mixers can be used together with
hydraulically and thermically controlled continuous flow
heaters if the flow pressure is at least 0,15 MPa.
4
English
Symbol6description
®
6(flow
®
max. 1 MPa
0,1 – 0,5 MPa
1,6 MPa
max. 80°C
65°C
Assembly6see6page632
Do not use silicone containing acetic acid!
Dimensions6(see page 31)
Flow6diagram6
(see page 31)
with EcoSmart
®
without EcoSmart
®
Spare6parts6(see page 34)
XXX = C olors
000 =
chrome plated
090 =
chrome plated/gold plated
Special6accessories
special tool (58085000) order as an extra
Installation kit order as an extra
Operation6(see page 35)
Cleaning6recommendations,6
see6enclosed6brochure.
Test6certificate6(see page 36)

Publicidad

loading

Este manual también es adecuado para:

Carlton 17030 serie