cecotec CONGA 1190 Serie Manual De Instrucciones página 36

ENGLISH
- Turbo-High
- Normal-Medium
- Eco-Low
7) Mopping
The water intensity can also be adjusted through the remote control. Press the WATER DROP
button in order to switch between the 3 different levels of water-drop speed:
- High-H
- Normal-M
- Low-L
CLEANING SCHEDULING
For an easier cleaning, the robot can be scheduled from the remote control. In accordance with
the configuration, the robot will automatically start cleaning the selected days at the desired
time.
* The time options in the remote control are: 12:00 a. m. – 11:59 p.m. y 12:00 p.m. – 11:59 p.m.
* Before setting the time and the robot configuration, make the robot's power switch is set on
"I" and that the the AUTO button on the control panel is lit up in is lit up in blue or red. If it is not
turned on, activate the robot from the control panel or from the remote control.
1. Set the current time and day.
• Press the button
• First, select the day of the week using the direction arrows
• To change from the day of the week to time, use the direction arrow
select the desired time. Repeat this action with the minutes: press
select the minutes.
• Once the day of the week and the time is set, press
Note: the day of the week will appear on the display. To make sure it has been saved, press
again and ensure it is the correct day.
36
and the week day and icon will start flashing on the display.
and select today's day.
. Press
and then
or to safe.
to
to