Important - Kerbl Moocall Manual Del Usuario

Step 3: Charging
To charge your Moocall calving sensor, flip away the rubber liner
to expose the charge cap catch, remove the charge cap and insert
charge cable as shown.
When charging is complete, replace the charge cap and fit the liner
back around the charge cap.
IMPORTANT: Ensure the charge cap is dry before placing it back on
the sensor to be sure of a proper, waterproof seal.
DO NOT force the USB cable into the charging port of the sensor.
Step 4: Turning on sensor
To turn on, press and hold the
button for four seconds.
The light on the sensor will blink
through the colours then settle on
blue every 4-5 seconds, indicating
that the sensor is on and active.
Hold the button for ten seconds to power off.
8