Operation - cecotec TOTALPURE 2500 Manual De Instrucciones

ENGLISH
Mesh filter that effectively blocks particles of up to 2.5 mm, which are the 99.9% of the dirt
accumulated. Preventing larger particles such as pet fur, dander and coarse dust can increase
the lifespan of the filter.
High-efficiency filter
It filters small-size particles of up to 0.3 microns, such as pollen, which represents 95% of the
dirt.
Activated-carbon filter
Filters volatile organic compounds, such as smoke and different kinds of polluting gases.
Fig. 16

3. OPERATION

Control panel
Fig. 17
Plug the device in. XXXX
Press the On/Off button, the device will start up on Auto mode with the lights on and detect
the air quality automatically.
When the device is switched on, the air quality indicator light will flash slowly. It will detect the
air quality and start pre-heating after 5 seconds.
Air quality indicator:
Fig. 18
Blue (PM2.5 = 0 ~50) Perfect
Green (PM2.5 = 50 ~100) Good
Yellow (PM2.5 = 100 ~150) Normal
Red (PM2.5 = 150 ~ ) Bad
Auto mode
Fig. 19
Auto mode will detect the air quality automatically and will operate on the most suitable fan
speed.
Sleep mode
The device includes a built-in radial sensor which senses the level of luminosity. If the
luminosity level is low, all the device's light will be dim and the device will automatically switch
to Night-Silent mode.
32
TOTALPURE 2500 / 5000 / 7500 CONNECTED
05620_05621_05622_TotalPure 2500_5000_7500_ Connected_Manual_YV_01200320.indd 32 05620_05621_05622_TotalPure 2500_5000_7500_ Connected_Manual_YV_01200320.indd 32 20/3/20 15:18 20/3/20 15:18