Supplied Accessories; The Remote Control; Placement Of Speakers - Panasonic SC-EN36 Instrucciones De Funcionamiento

Table of contents

Supplied accessories

The remote control

Attach the stand to the unit

Placement of speakers

Control guide
Connections
Disc operations
Radio operations
Sound adjustment
Timer
Changing the main unit and
remote control mode
Troubleshooting guide
Maintenance
Specifications
Safety precautions
The remote control
R6/LR6, AA
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer's instructions.
Attach the stand to the unit
Support stand
(included)
Placement of speakers
2
Speakers are designed identically so
that no left or right channel orientation
2
is necessary.
■ Batteries
• Insert so the poles (+ and – ) match
those in the remote control.
• Do not use rechargeable type
batteries.
• Do not heat or expose to flame.
• Do not leave the battery(ies) in an
automobile exposed to direct sunlight
for a long period of time with doors
and windows closed.
Rear of the main unit
Note
• Keep your speakers at least 10 mm away from
the system for proper ventilation.
• These speakers do not have magnetic
shielding. Do not place them near televisions,
personal computers or other devices easily
influenced by magnetism.
• You cannot take the front net off the speakers.
Supplied accessories
Please check and identify the supplied
2
accessories.
2
2
1 Remote control
2
3
4
(N2QAYB000269)
4
1 FM/AM antenna
6
6
7
1 Support stand
7
8
8
9
10
Note
• The included AC mains lead is for use with this unit only. Do not use it
with other equipment.
• Do not use an AC mains lead from other equipment.
Remote control signal sensor
Insert the stand fully until
a click sound is heard.
Caution
•
•
1 M3 white cord
1 AC mains lead
2 Batteries
■ Use
• Aim at the sensor, avoiding
obstacles, at a maximum range
of 7 m directly in front of the
unit.
• Operation can be affected by
strong light sources, such as
direct sunlight, and the glass
doors on cabinets.
Ensure the stand is securely attached to the main unit
for stabilization.
Note
• The supplied stand is specially designed for use
with this unit.
• Only use as indicated in this setup.
Use the speakers only with the recommended
system. Failure to do so may lead to damage
to the amplifier and/or speakers, and may
result in the risk of fire. Consult a qualified
service person if damage has occurred or if you
experience a sudden change in performance.
Do not attach these speakers to walls or
ceilings.