Troubleshooting - Zanussi ZDM11301WA Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1
2
1
3
1
2
5
Put the filters back.
Turn the filter A
clockwise to lock it.

Troubleshooting

The appliance does not start or it stops during
operation.
Before you contact the Service, refer to the in-
formation that follows for a solution to the
problem.
10
A
B
2
Remove the filters A
and B from the bot-
tom of the appliance.
4
Fully clean the filters
below running water.
Cleaning the spray arm
Do these steps to remove and to put the spray
arm back:
1
3
If the holes in the spray arms become
clogged, remove remaining parts of soil
with a thin pointed object.
External cleaning
Clean the appliance with a moist soft cloth.
Only use neutral detergents. Do not use abra-
sive products, abrasive cleaning pads or sol-
vents.
With some problems, different indicators
flash continuously or intermittently at
the same time to show an alarm code.
2
www.zanussi.com

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido