BABYTREND muv HC57D Manual De Instrucciones página 12

Ocultar thumbs

página de 36

/ 36
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

ADAPTER

UNIVERSAL CAR SEAT ADAPTER

ATTENTION:

The Height Adjustment Bracket must be set at the

lowest postion before placing the adapter and car

seat. Follow the FRAME HEIGHT WARNINGS on

page 19 when using the Adapter for the Car Seat.

• Attach the Infant Car Seat Adapter by lining

27)

up the seat anchors on the side of the seat

with the anchors on the high chair frame.

The rear buckle of the adapter can face

towards either the rear or the front of the

highchair. Push them together until the

anchors lock securely. The buttons should

click into the holes on the seat anchors

(Fig. 27a).

• Place the car seat onto the Universal Car

Seat Adapter. The front of the car seat should

be facing the same direction as the adapter

buckle (Fig 27b).

• Strap the Safety Belts through the Belt Path

on the Car Seat and connect the buckles

together (Fig 27c). Tighten the strap so it

fits snugly and the car seat is secured to the

frame. Tighten the bottom support straps,

located under the car seat adapter bar, by

pulling back on the loop and sliding the

adjuster forward for a snug fit (Fig. 27d).

NOTE: The Safety Belt must be installed

through the Belt Path before using this

product.

"Click"

Fig. 27a

AVERTISSEMENT

Fig. 27c

Compatible with most Baby Trend® modular strollers and

joggers (MUV™, Snap Tech, Snap Gear® and Snap Fit™)

and transforms them into infant car seat carriers.

ADAPTER

WARNING

Fig. 27b

Fig. 27d

Tabla de Contenido

Tabla de contenido

BABYTREND muv HC57D Manual De Instrucciones página 12

Idiomas disponibles

Manuales relacionados para BABYTREND muv HC57D

Productos relacionados para BABYTREND muv HC57D

Tabla de contenido