Settings Menu; Triggers; Parameters - Focal ASTRAL 16 Manual De Uso

ASTRAL 16
U s e r m a n u a l
The Name and Description Target curve can
be changed. We also recommend to select the
correct listening area that you used to make
the Dirac Live corrections (A). Click save (B) to
continue. For corrections made to a zone, options
are not available. Simply click save.
Note that each time you go through the Dirac
Live process, the former filter design gets
replaced. Each time the calibration is run, a
new profile is created with the new Dirac Live
correction.
16. Return to Speakers Page
Now that you are back at the page where
individual speakers can be edited, you will notice
the new Dirac reference profile you named in the
previous step is selected. New columns created
indicate the calculated Dirac Delay and Dirac
Level. No changes can be made to this reference
profile. Should you wish to make changes,
duplicate the profile, make desired changes to
the duplicate, save changes to the profile and the
theater. See "Profiles".

Settings Menu

Astral 16 includes a variety of system wise settings
that are set in this menu that govern behavior of
the unit. Ensure these are set as required for easy
operation of Astral 16 and any attached devices.
These are only accessible to those with Installer
level access or Expert User if assigned by the
Installer.

Triggers

Astral 16 has 4 independent DC voltage triggers
which can be configured to modulate the power/
standby status of connected equipment such as
projectors, source components, or amplifiers.
You may keep the default name for each trigger,
or rename them to something more descriptive.
Each trigger has the following options available:
Manual Switching: Turn on to enable a button
•
on the remote control interfaces that allows a
user to toggle the trigger manually.
Auto Switching: Enabled on Wake activates
•
the trigger when Astral 16 is powered on from
standby. It will not automatically deactivate
the trigger when Astral 16 is placed into
standby. Enabled on Input makes the trigger
available in the Input Menu. When set to Y
™
for an input, the trigger activates when that
input is selected from a remote interface. See
"9. Triggers". Enabled on Preset makes the
trigger available in the Preset menu. When a
preset is selected in which a trigger is marked
Y, the trigger is activated. Note that Auto
Switching trigger behavior will override any
Manual Switching behavior.
• Disabled on Sleep: Select Y if the trigger
should deactivate when Astral 16 is placed
into standby.
• Active State: Select whether the active state
for the trigger is 12V or 0V.
Delay: You may wish to set a delay of up to 8
•
seconds. Usually this is done if you are using
triggers to activate amplifiers. If all amplifiers
power on at once, the inrush current could
trip a circuit breaker. Focal amplifier triggers
may be daisy chained so that only once the
preceding amplifier is fully powered does
the following amplifier initiate it's power up
sequence thereby obviating the need for
a delay (or multiple triggers) when using
modern Focal amplifiers.

Parameters

• Downmix zone: define whether the dedicated
downmix outputs feed an audio only zone
or an audio video zone. When A/V, lipsync
adjustment is available in that zone's remote
control functions, and that zone's general
delay can be set using the setting below.
Audio Control Range MAX: Set the maximum
•
allowable volume. +6db (default), +3dB, 0dB.
• Volume Dim Level: To quickly attenuate the
volume (but not mute it), a user can click
Volume Dim. Set the level of attenuation here.
Default is -20dB.
31