The remaining charge indicator is incorrect.
•
This phenomenon occurs when you use the camera in an extremely hot or cold location.
A discrepancy arose between the remaining charge indicator and the actual remaining battery
•
charge. Fully discharge the battery pack once, then charge it to correct the indication.
The battery pack is discharged. Insert the charged battery pack (page 10).
•
The battery pack is dead. Replace it with a new one.
•
Cannot charge the battery pack.
You cannot charge the battery pack using the AC Adaptor (not supplied). Use the battery
•
charger to charge the battery.
Shooting still images/movies
Cannot record images.
Check the free capacity of the internal memory or "Memory Stick Duo" (page 31). If it is full,
•
do one of the following:
Delete unnecessary images (page 18).
–
Change the "Memory Stick Duo".
–
You cannot record images while charging the flash.
•
When shooting a still image, set the mode dial to a position other than
•
Set the mode dial to
•
The image size is set to [640(Fine)] when recording movies. Do one of the following:
•
Set the image size to other than [640(Fine)].
–
Insert a "Memory Stick PRO Duo".
–
Vertical streaks appear when you are shooting a very bright subject.
The smear phenomenon is occurring and white, black, red, purple, or other streaks appear on
•
the image. This phenomenon is not a malfunction.
34
when shooting movies.
.