Ais Connection; Fastheading Connection - Raymarine Lighthouse eS Serie Manual Del Usario

4.13 AIS connection

A compatible AIS unit can be connected using
SeaTalk ng® or NMEA 0183.
Connection using SeaTalk
1. MFD
2. SeaTalk ng® connection to MFD.
3. SeaTalk ng® AIS receiver / transceiver.
An AIS unit can be connected to the MFD by
following the details provided in section
0183 connection — Power/NMEA/Video cable
the installation instructions provided with the unit.
Cables and connections
ng®
1
3
ng
SeaT alk
4.8 NMEA

4.14 Fastheading connection

If you wish to use MARPA (radar target acquisition)
functions on your multifunction display you need
either:
• An autopilot connected to the multifunction display
via SeaTalk ng
connected to the course computer and calibrated
2
via the pilot control head; or:
• A Raymarine or third-party fastheading sensor
connected to the multifunction display via NMEA
0183.
Note: Please contact your dealer or Raymarine
technical support for more information.
D12263-2
and
or NMEA 0183. The compass is
47