Bracket (Trunnion) Mounting - Raymarine Lighthouse eS Serie Manual Del Usario

2. Slide the backing plate behind the locating tabs
as shown below.
Removing the screw covers
1. Carefully insert the tip of a small flat blade screw
driver into the recesses around the edge of the
screw covers.
2. Gently lever the screw driver to push the screw
cover forward, away from the display.
The cover should now come away from the display
easily.
Mounting

5.2 Bracket (trunnion) mounting

The display can be mounted on a trunnion bracket.
Before mounting the unit ensure that you have:
• Selected a suitable location.
• Identified the cable connections and route that the
cables will take.
• Attach the screw covers.
D13335-1
D13279-2
1. Mark the location of the mounting bracket screw
holes on the chosen mounting surface.
2. Drill holes for the fixings using a suitable drill,
ensuring there is nothing behind the surface that
may be damaged.
3. Use the fixings supplied with the mounting
bracket to attach securely.
4. Attach the display to the mounting bracket.
D13280-2
57