Technical Specifications; Disposal Of Old Electrical Appliances - cecotec CONGA 1790 ULTRA Manual De Instrucciones

ENGLISH
The robot does not return to the charging
base
The main brush does not rotate
The robot movements and routes are usual.

6. TECHNICAL SPECIFICATIONS

Product: Conga 1790 Ultra
Product reference: 05473
Output voltage: 19 V DC
Output current: 0.6 A
Power: 40 W
Battery: 14.4 V DC Li-Ion 2600 mAh
100-240 V AC ~, 50/60 Hz
Made in China | Designed in Spain

7. DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE), specifies that old household electrical appliances must
not be disposed of with the normal unsorted municipal waste. Old appliances
must be collected separately, in order to optimize the recovery and recycling
of the materials they contain and reduce the impact on human health and
the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your obligation to
dispose of the appliance correctly. Consumers must contact their local authorities or retailer
for information concerning the correct disposal of old appliances and/or their batteries.
46
Remove objects within 3 ft/1 m to the left and
right side and within 6 ft/2 m of the front of
the charging base.
The robot will return quicker to the charging
base when it is close to it. If the robot is far
away from it, it will take longer to detect it.
Clean the charging terminals.
Clean the main brush.
Check if the main brush is properly installed.
Clean the sensors carefully with a dry cloth.
Restart the robot by turning the power switch
off and on.