Cleaning And Maintenance - cecotec CONGA 1790 ULTRA Manual De Instrucciones

ENGLISH
Fig. 33
Use the left and right buttons to set minutes and hour. Use upwards and downwards buttons
to change the digit while it blinks.
Fig. 34
Finally, press the power or the clock button. The robot will beep when the time settings have
been confirmed.
Fig. 35
Setting cleaning schedule
For a better and more comfortable cleaning, the robot includes a schedule function to set daily
schedules through the remote control or the App in those Conga models that include app. In
accordance to the configuration, the robot will automatically start cleaning the selected days
at the desired time.
The time options on the remote control are: 12:00 a. m.–11:59 p.m. and 12:00 p.m.–11:59 p.m.
Before setting the time and the robot configuration, make sure the robot's power switch is on
and that the power button on the robot is lit up.
Configuration with the remote control
Press the schedule button on the remote control. Digits will start blinking.
Fig. 36
Use direction buttons to select the day. Once selected, use right and left buttons to select
minutes and hours. Use direction buttons when digits are blinking to configure the desired
minutes and hours. Press the power button to save settings. Enter the desired days and follow
the same steps to schedule them.
Fig. 37
Finally, press schedule button to exit scheduling mode. The robot will beep once indicating the
scheduled cleaning settings have been confirmed.
The user may schedule as many days per week as desired. The home screen will display when
the robot is scheduled.
Cancelling scheduled cleaning
Press the schedule button on the remote control, select the day you wish to delete and change
the set time to 00:00 am., this is the time to be set to cancel the cleaning program.
Fig. 38

4. CLEANING AND MAINTENANCE

In order to lengthen your robot's shelf life and to allow your robot to operate at peak
performance, carry out the following procedures periodically.
Empty the robot's dust tank.
41