Preparation For Treatment; Assembling The Pari Pep ® System I; Treatment Without Pari Nebuliser; Treatment In Combination With Pari Nebuliser - Pari PEP System I Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 77
4

Preparation for treatment

- Please follow the hygiene regulations before the device is used for
the first time, before it is re-used, and after any long break in use.
- Ensure that the PARI PEP System was cleaned, disinfected and,
if appropriate, sterilised after the last treatment (see Chapter 6
"Hygienic re-use").
4.1 Assembling the PARI PEP
4.1.1

Treatment without PARI nebuliser

Figure A:
Follow these steps to assemble the PARI PEP System:
• Place the PEP upper part (2) on the PEP I lower part (3).
• Place the mouthpiece without expiratory valve (1) over the other end of the
PEP I lower part.
4.1.2

Treatment in combination with PARI nebuliser

Figure C:
Follow these steps to assemble the PARI PEP System:
• Remove the inspiratory valve (10a) and the mouthpiece with the expiratory
valve (10b) from the PARI nebuliser (10).
• Place the PEP upper part (2) on the PEP I lower part (3) and then place
both together on the PARI nebuliser.
• Place the included mouthpiece without expiratory valve (1) over the
PARI nebuliser.
24
®
System I

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Pep system ii

Tabla de contenido