Maintenance Plan; Maintenance Work; Emptying The Dirt Tank; Replacing The Disposal Bag - Makita 447 L Instrucciones De Manejo

7 Maintenance
7.1

Maintenance plan

7.2.1 Emptying the dirt tank

7.2.2 Replacing the disposal bag

7.2.3 Replacing the filter element
7.2.4 Check suction hose and
accessories for clogging,
clean if necessary
7.2

Maintenance work

7.2.1 Emptying the dirt tank
7.2.2 Replacing the disposal
bag
After work
•
Only after picking up harm-
less dust.
Empty the dirt tank when vacu-
uming without a filter bag.
During the following work,
ensure that dust is not unnec-
essarily spread around.
Wear a P2 breathing mask.
As required
•
•
•
1. Remove the upper section
of the cleaner from the dirt
tank.
2. Hold the dirt tank at the grip
underneath the tank and tip
out the dirt.
3. Dispose of the dirt in accord-
ance with legal regulations.
4. Clean the rim of the tank be-
fore fitting the upper section
of cleaner.
Before reinserting the suction
hose:
5. Clean the inlet fitting and
hose collar.
1. Open the retaining clamps
and remove the upper sec-
tion of the cleaner from the
dirt tank.
2. Close the dispsal bag using
the cable binder (sticks out-
side at the disposal bag).
3. Carefully remove the dispos-
al bag connection from the
inlet fitting.
4. Close the waste bag connec-
tion with the slide.
5. Dispose of the dirt in accord-
ance with legal regulations.
6. Insert a new filter bag into the
cleaned tank as described in
the instructions enclosed.
IMPORTANT:
Press the filter bag connection
firmly on to the inlet fitting.
MAKITA 447 L
english
9