dirna Bergstrom bycool SPLIT OFF ROAD Manual Del Usuario página 10

SPLIT
EN
Function
F0
Selecting F0 in the display shows the selected temperature and allows the user to
choose the comfort temperature which will be displayed from 15ºC to 27ºC or 59ºF
to 71ºF and to vary the unit's centrifugal blower speed (5 speeds indicated with the
characters V1 to V5 ).
Comfort temperature can be controlled by briefly pressing the keys
control panel or
The centrifugal blower speeds will be controlled by keeping the
control panel pressed down or from
V1 , V2 , V3 , V4 , V5 . The display shows the degrees selected when the unit is running.
F1
- Function - Digital thermometer function
In this function, Split displays the interior cabin temperature.
Function F4 - Automatic unit operation
Selecting F4 allows the user to choose the comfort temperature 15ºC to 27ºC (59ºF to
71ºF), which will be selected from the control panel
. When selecting, the display will switch between CA and the degrees selected.
With this function the unit automatically regulates and controls comfort temperature by
acting on the compressors and fan speed. Pressing the remote control key
function F4 and moves to F0 (Manual Function). The unit runs initially in F4 with the
default parameters.
Function F6 - ºF Selection
To activate this function, keep the On/Off
F6 , and then release the key to directly enable ºF. To return to ºC, keep the
on the control panel pressed down with the display flashing C , when it stops
flashing, press the
carrying out this operation, meaning it must be registered again once finished.
- Manual operation
remote control.
on the remote control, with the display showing
key on the control panel. The control is disabled when
10
Air conditioning for vehicles
or the remote control
key pressed down until the display shows
. of the
keys of the
cancels
key