Rear Wheel Replacement - Stryker Stair-PRO 6250 Manual De Uso

REAR WHEEL REPLACEMENT

Tools Required:
• 1/2" Wrench
• 3/16" Hex Key
Procedure:
1. Turn the chair upside down so it is resting on the
seat frame and back frame as shown in Figure 62.
2. Using a 1/2" wrench and a 3/16" hex key, remove the
button head cap screw, nut, spacers and wheel from the
frame. Discard the cap screw and nut.
3. Use the new fasteners provided to attach the new wheel
to the frame.
4. Repeat for the other wheel, if necessary.
www.stryker.com
Service Information
6250-001-161 REV D
Figure 62 - Turn the chair upside down
Figure 63 - Remove the wheel assembly
Return To Table of Contents
English
1-41