Safety Regulations; Technical Data - WAGNER IR-100 Instrucciones De Uso

Tabla de contenido

Publicidad

Contents

Safety regulations ___________________________ 3

What kinds of coating material can be used ________ 3

Technical Data ________________________________ 3

Legend to gure 1 ____________________________ 10
Placing into operating _____________________ 12/13
Operating pressure __________________________ 14
For breaks in work ___________________________ 14
Cleaning ________________________________ 15-18
Accessories Inline-Roller IR-100 ________________ 19
Spare parts list Inline-Roller IR-100 _____________ 21
Spare parts diagram Inline Roller IR-100 ________ 25
Important notes on product liability ____________ 26
CE Declaration of conformity __________________ 26
Warranty ___________________________________ 31
Sales and service companies __________________ 40
Safety regulations
All local regulations in force must be observed.
1.
Read the operating instructions carefully and follow the
instructions given in order to avoid possible dangers.
2. Do not point the Inline Roller (internally
fed) at yourself or other persons.
Danger of injury to the eyes from the
coating material coming out of the paint
roller.
3. When assembling and disassembling the paint roller,
the roller frame or the extension, and for breaks in
work always secure the trigger with the safety lock.
This will prevent the trigger on the dosing handle
from being pulled unintentionally.
Trigger secured –
the safety lock points horizontally backwards.
Trigger released –
the safety lock points horizontally forwards.
4. Care must be taken that the max. adjustable
operating pressure of the airless high-pressure pump
is not greater that the permissible operating pressure
of the Inline Roller.
Moreover, the thread on the high-pressure hose of the
device should correspond.
5. Take care that all material-carrying components are
always rinsed clean so that no blockages occur.
IR-100
GB
What kinds of coating materials can be used
Page
All water-based coating materials that can be used with a
roller, e.g. penetrating stopper, silicate paints, ller paints,
oor coatings, roof coatings, concrete protection paints,
fabric adhesives, emulsion paints, latex plastic.
The use of solvent-containing coating materials ( ash point
of 21 °C or higher) may cause the seals to swell up which will
cause leaks.
Technical data
Max. operating pressure:
High-pressure hose:
Standard paint roller:
Measurements of the paint
roller:
Extension:
Weight without
high-pressure hose:
Danger
250 bar
DN 4 mm, 7.5 m
Thread M 16 x 1.5
Woven plush cushioned,
short pile 13mm
Ø 38 mm x 230 mm
0.5 m long
1.3 kg
3

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ir – 100

Tabla de contenido