Turntable Operation - Trevi TT 1072 DAB Manual De Usuario

ENGLISH
RADIO ENCODING / TURNTABLE / CASSETTE / AUX IN / BT
The following instructions apply to both USB and SD memory card.
1. Switch on the device and select the desired function (Radio / Turntable / Cassette / Aux In / BT).
2. Insert a USB / SD memory into the corresponding input.
3. Select the radio station you want to record or start playback from the selected source.
4. Press the REC key (23) to start recording, in the case of radio recording, all functions such as station search and recall of stored
stations are disabled.
5. To end the recording, press the STOP button (25).
6. The recorded song is saved in the USB memory in a folder called RECORD / LINE_IN.
COPY OF MP3 TRACKS BETWEEN USB DEVICE AND SD CARD
It is possible to copy the tracks on USB to SD and vice versa:
- Single track: while listening to a track (from USB or SD source) press the REC button (23). When the ONE indication appears,
press the REC button again (23). The track will be copied.
- Entire folder: when playback is stopped, press the ALBUM UP / DOWN buttons (28-29) to select the folder to copy. Press the
REC. Button (23). Using the keys (27) or (26) select FOLDER and press the REC key (23) again. The folder will be copied.
- All tracks: with playback stopped, press the REC button (23). Using the keys (27) or (26) select ALL and press the REC Key
(23) again. All tracks will be copied.
DELETING TRACKS ON USB / SD DEVICE
It is possible to delete the tracks present on USB / SD:
- Single track: while listening to a track (from USB or SD source), long press the DEL key (23). When the ONE indication appears,
press the DEL key (23) again. The track will be cleared.
- Entire folder: when playback is stopped, press the ALBUM UP / DOWN buttons (28-29) to select the folder to be deleted. Long
press the DEL key (23). Using the keys (27) or (26) select FOLDER and press the DEL key (23) again. The folder will be deleted.
- All tracks: with playback stopped, long press the DEL key (23). Using the keys (27) or (26) select ALL and press the DEL key
(23) again. All tracks will be cleared.
Note: deleted tracks are not recoverable.

TURNTABLE OPERATION

Remember to carefully remove the stylus guard.
1. Switch on the appliance and press the FUNCTION button (11) several times until the indication PHONO appears on the display.
2. Open the turntable protection glass (2).
3. Select the speed of the disc using the turntable speed selector (41).
4. Place the disc on the platter. Use the adapter supplied (38) in case the disc is a 45 rpm.
5. Release the head arm from the catch, raise the arm and place the stylus on the disc. Using the lever (39), lower the head arm.
Playback of the disc will begin.
6. At the end of the disc playback, the turntable will stop the rotation if the AUTOSTOP function is active (selector 40); bring the
lever (39) to the raised arm position.
Note1: Autostop may stop the rotation of the disc before the end of the incision. In this case, deactivate the function by setting
the selector (40) to OFF.
Note2: Remove the turntable stylus protector before use.
Note3: make sure that the arm is locked by the arm retainer after each use
CASSETTE PLAYER OPERATION
CASSETTE REPRODUCTION
1. Switch on the appliance and press the FUNCTION button (11) several times until the indication TAPE appears on the display.
2. Press the STOP / EJECT button (20) to open the cassette door and insert a cassette with the side you wish to listen facing
outwards.
3. Adjust the volume to your liking.
4. Press the PLAY button (17) to start playback.
5. Press the PAUSE button (21) to temporarily stop playback, press it again to resume it.
6. To fast forward the tape, press the FWD button (19).
7. To rewind the tape quickly, press the REW button (18).
8. Press the STOP / EJECT button (20) to stop playback permanently, press it again to eject the cassette.
16
TT 1072 DAB