Description; Components; Handset; Charging Station - Extel MOBI Instrucciones De Uso E Instalación

2. DESCRIPTION

1 • Mobile handset
4 • Charging station adapter
7 • Rain hood
General
This interphone consists of an interior handset and an exterior intercom panel for communicating with visitors
who ring the bell.
To get the most out of your interphone, please read this instruction manual carefully and keep it for future refer-
ence.

3. COMPONENTS

a. Handset
(fig. 2a)
1. Loudspeaker for listening to conversations.
2. LCD screen
2a Mobile handset identifier number
3. Display keys (for modifying the LCD screen functions)
4. Multidirectional key for navigation
4a - Additional function: new handset registration shortcut
4b - Additional function: activate/deactivate the microphone during a conversation
5. Electric lock or latch control
6. Automatic gate device control (available only if the electronic control box is connected to a low voltage supply
(p7-b))
7. Connect key. Press this key to communicate with the intercom panel (available only if the electronic control
box is connected to a low voltage supply (p7-b)) Please note: there is a short delay before hearing the tone.
8. Press this key to end a conversation or to return to the main screen
9. Socket (headset not included)
10. Microphone for communicating with the intercom panel.
Screen
11. Battery charge state
12. Connect to the intercom panel
13. Loudspeaker mode
14. Loudspeaker off
15. The handset is connected but the coverage is weak.
16. Ringer indicator (appears when a visitor presses the intercom panel button)
17. Mute mode (silent mode). To activate Mute mode, press the
it again for 3 seconds.
18. Volume setting
19. Sound settings
20. Clock settings
21. Settings
b. Charging station
22. Power supply socket
23. LED charging indicator
GB2
(fig 1)
2 • Belt clip
5 • Intercom panel
8 • Electronic control box
(fig 2)
(fig. 2b)
CFI EXTEL MOBI - 11/2012
3 •

Charging station

6 • 2 Rechargeable batteries
button for 3 seconds; to deactivate it, press