(System Audio Control) Turning Off The System, Tv And The Connected Components; (System Power Off); Using The Power Saving Function - Sony HT-CT150 Manual De Instrucciones

Turning off the system, TV
and the connected
components

(System Power Off)

When you turn the TV off by using the power
button on the TV's remote, the system and the
connected components turn off automatically.
Also, when you turn the TV off by using the
system's remote, the system and the connected
components turn off automatically.
TV
(yellow)
While pressing and holding TV (yellow),
press AV ?/1.
The TV, the system, and the connected
components are turned off.
22
GB
Note
• Depending on the status, the connected components
may not be turned off. For details, refer to the
operating instructions of the connected components.
Using the power saving
function
(HDMI SIGNAL PASS THRU)
When using "BRAVIA" Sync, you can enjoy
image and sound from a Blu-ray Disc, etc., on
the TV, even if the system is in standby mode.
Power consumption in standby mode is also
reduced automatically when the TV is turned off
if "PASS THRU" is set to "AUTO."
AV ?/1
The default setting is "AUTO."
Note
• This function is available only when "CTRL HDMI"
is set to "ON."
C, X, x, c,
1
Press AMP MENU.
2
Press
appears, then press
3
Press
press
X/x
repeatedly until "SET HDMI"
or c.
X/x
to select "PASS THRU," then
or c.
AMP
MENU