Taurus GIRO Manual De Instrucciones página 10

- The appliance can be switched on again using
the switch once the control device has cooled, if
it is not switched on again, do not force it, allow
it to cool.
ELECTRONIC SPEED CONTROL:
- The speed of the appliance can be regulated
by using the speed selector control (B). This
function is very useful, as it makes it possible to
adapt the speed of the appliance to the type of
work that needs to be done.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE (GIRO MODEL):
- Stop the appliance, selecting position 0 on the
speed selector control.
- Unplug the appliance from the mains.
- Clean the appliance.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE (GIRO COMPLET MODEL):
- Stop the appliance, selecting position 0 on the
speed selector control.
- Unplug the appliance from the mains.
- Press the button (F) and lift the motor body.
- Remove the bowl (G) from the base (H).
- Press the button (E) to remove motor body.
- Press the button (A) to remove beater or dough
hooks.
- Clean the appliance.
ACCESSORIES:
BEATER ACCESSORY (I):
- This accessory is used to whip cream, beat
eggs, batters, fatless sponges, meringues,
cheesecakes, mousses, and soufflés.
- Insert the beater into the orifices in the body of
the motor pressing them in until you hear a click
(Fig.1A). The beater can be placed in either of
the two orifices, as they are identical.
- Put the food into the rotatory bowl (G) or into a
large receptacle and switch the appliance on.
For best results with Giro model, turn the whisk
clockwise.
- Using speed selector control (B), from minimum
speed, increase gradually to maximum speed.
- Remove the blending accessory pressing the
eject button (A).
DOUGH HOOK ACCESSORY (J):
- This accessory is used for knead bread, pizza
dough, etc.
- Insert the dough hooks into the orifices in the
body of the motor pressing them in until you
hear a click (Fig.1B). The dough hooks are
not the same. Place the dough hook with the
washer in the large orifice. They cannot be fitted
inversely.
- Put the food into the rotatory bowl (G) or into a
large receptacle and switch the appliance on.
For best results with Giro model, turn the whisk
clockwise.
- Using speed selector control (B), from minimum
speed, increase gradually to maximum speed.
- Remove the kneading accessory pressing the
eject button (A).
TURBO FUNCTION (C):
- This allows you to work using pulses and helps
to control the result of the preparation.
- Press the turbo button (C). Keep the button
pressed down to achieve the desired result.
CLEANING
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
- It is advisable to clean the appliance regularly
and remove any food remains.
- The following pieces may be washed in a dis-
hwasher (using a soft cleaning program):
• Bowl (*)
- Then dry all parts before its assembly and
storage.
ANOMALIES AND REPAIR
- Take the appliance to an authorised technical
support service if product is damaged or other
problems arise. Do not attempt to disassemble
or repair the appliance yourself as this may be
dangerous.
FOR EU PRODUCT VERSIONS AND/OR IN
CASE THAT IT IS REQUESTED IN YOUR
COUNTRY: