Taurus GIRO Manual De Instrucciones página 9

or tangled cables increase the risk of electric
shock.
- Do not use or store the appliance outdoors.
- Do not touch the plug with wet hands.
- Take the necessary measures to avoid starting
the appliance involuntarily.
- Do not touch any of the appliance's moving
parts while it is operating.
USE AND CARE:
- Do not use the appliance if its accessories are
not properly fitted.
- Do not use the appliance if the accessories
attached to it are defective. Replace them
immediately.
- Do not use the appliance if the on/off switch
does not work.
- Do not move the appliance while in use.
- This appliance is for household use only, not
professional, industrial use.
- Store this appliance out of reach of children and/
or persons with physical, sensory or reduced
mental or lack of experience and knowledge.
- Keep the appliance in good condition. Check
that the moving parts are not misaligned or jam-
med and make sure there are no broken parts
or anomalies that may prevent the appliance
from operating correctly.
- Never leave the appliance connected and unat-
tended if is not in use. This saves energy and
prolongs the life of the appliance.
- Do not use the appliance for more than 5 minu-
tes at any one time. Allow to cool for 15 minutes
before subsequent use.
- Do not work with more tan 1 kg flour.
SERVICE:
- Any misuse or failure to follow the instruc-
tions for use renders the guarantee and the
manufacturer's liability null and void.
DESCRIPTION
A Eject button
B Speed selector control
C Turbo button
D Motor body
E Motor body anchoring button (*)
F Unlock appliance arm button (*)
G Rotating bowl (*)
H Bowl stand (*)
I Beater
J Dough hooks
K Scraper (*)
- (*) Only available in the model Giro Complet
- If the model of your appliance does not have the
accessories described above, they can also be
bought separately from the Technical Assistance
Service.
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all products' packaging has
been removed.
- Before using the product for the first time, clean
the parts that will come into contact with food in
the manner described in the cleaning section.
USE (MODEL GIRO):
- Unroll the cable completely before plugging it in.
- Place the accessory (I, J) you want to use to
motor body accordingly. (Fig.1).
- Connect the appliance to the mains.
- Turn the appliance on, by using the speed
selector control (B).
- From the appliance's five speeds select the one
you need. Always start with slow speeds and
increase gradually until you reach the one you
wish to use.
- Work with the food you want to process.
USE (MODEL GIRO COMPLET):
- Unroll the cable completely before plugging it in.
- Press the unlock appliance arm button (F) to lift
machine arm.
- Hold the appliance by hand while pressing the
motor body anchoring button to remove it (E).
- Fix the accessory (I, J) as desired on the anchor
by matching the hole and ensuring it is properly
engaged.
- Place the motor body in the bowl stand and
press down until the button returned to is origi-
nal position (E).
- Press the unlcock appliance arm button (F) to
returns to initial position.
- Connect the appliance to the mains.
- Turn the appliance on, by using the speed
selector control.
- To avoid a fierce, start up of the fan, it is advi-
sable to start off from the lowest speed position
and, once the fan has been switched on,
progressively increase the speed to the desired
position.
- Work with the food you want to process. You
can use the scraper (K) to stir the mixture while
the appliance is working.