dirna Bergstrom bycool LITE Instrucciones De Montaje página 18

LITE
EN
Screw (1) hex spacer and (2) M6 / 100 nuts on
10
M6 each stud and leave at the measurements
indicated. Tighten nut (*) against hex spacer.
(Y) Iveco Stralis AD cab (short cab) - Stud
(L = 80):
In the front: 79 mm.
In the rear: 87 mm.
(Y) Iveco Stralis AT cab (long cab) and AS
(extra long cab) - Stud (L = 100):
In the front: 113 mm.
In the rear: 108 mm.
Screw 10 mm studs in the M6 inserts of the
11
base and tighten the nuts against the inserts.
Caution: Leave hexagonal spacers at the
indicated measurements of the front and back
section.
(*) Iveco Stralis cabina AD (short cabin): 79
mm.
(*) Iveco Stralis cabina AT (long cabin) y AS
(extra long cabin): 113 mm.
(Y) Iveco Stralis cabina AD (short cabin): 87
mm.
(Y) Iveco Stralis cabina AT (long cabin) y
AS (extra long cabin): 108 mm.
FRONT PART
11
*
11
18
Y
10
*
Caution: The distance should never
!
be more than 10 mm.
Y
10 (+0 / -2)
REAR PART
11
®