Operation And Use - Beem Fire & Sun B25.001 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39
18 EN
Setting the temperature
1. Press the
°C (6).
2. Set the
and the
desired temperature.
The temperature setting is indicated in the
display (3).
The temperature can be changed at any time
during the cooking process.
Function
Toasting
Rotary spit
Convector
Defrost
Roasting
NOTE
The variable temperature ranges can
be increased or decreased in 5 °C steps
with the
and
Setting the cooking time
1. Press the timer button
2. Set the
and the
desired cooking time.
The set cooking time is indicated in the dis-
play (3).
The cooking time can also be changed dur-
ing the cooking process.
An acoustic signal is emitted after the cook-
ing time has elapsed. END flashes in the
display and the appliance switches itself off
automatically after approx. one minute.
(8) buttons to the
Temperature range
Basic setting
cannot be changed
100 °C – 230 °C
100 °C – 230 °C
50 °C
100 °C – 230 °C
buttons .
(7).
buttons (8) to the
BEEM - Elements of Lifestyle
Function
Continuous from light brown
("light" 2 min 30 sec) to dark
Toasting
("dark" 6 min 10 sec.) in 30-
1 min to 30 min in 1-minute
Rotary
spit
30 min to 3 h in 5-minute steps.
1 min to 30 min in 1-minute
Convec-
tor
30 min to 3 h in 5-minute steps.
1 min to 30 min in 1-minute
(Defrost)
30 min to 3 h in 5-minute steps.
1 min to 30 min in 1-minute
Roasting
30 min to 3 h in 5-minute steps.
When making toast, the time is influenced
indirectly. Selecting the browning level auto-
matically specifies the time for the "Toasting"
programme. See the section Preparation -
Toasting (page 19).

Operation and use

Inserting the grease drip tray
Lay the grease drip tray (24) from the front
between the lower heating elements.
Using the grip
(images A1-A3)
A rotary spit grip (16) is required to remove
the grease drip tray:
1. Push the retaining hooks of the grip from
above into the holes of the grease drip tray.
2. Position the handle of the grip horizontally
in order to lift the grease drip tray upwards
and forwards.
A rotary spit (16) is also required for remov-
ing the rotary spit (18).
1. Push the grip for the rotary spit (16) into
the appliance so that the retaining hooks of
the grip are situated under the respective re-
cesses of the grill skewer (image A1).
2. Take the rotary spit out by lifting it slightly
on the left side.
Timer setting
second steps.
steps.
steps.
steps.
steps.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido