BFT SELETTO Instrucciones De Uso página 10

ENGLISH
depending on the number of figures set in the
first programming phase (par. 7.2), and press
Enter (0+8).
6 If Enter is pressed again, the procedure is resumed
from point 3 (entering position⇒zone⇒code).
7 To end programming, press any key or wait for
10s.
7.3.2) Cancellation of codes
This operation is used to cancel all the previously pro-
grammed codes and settings from the memory.
1 Press Enter (0+8) 4 times.
2 Type a valid code number.
3 Press Enter (0+8) and keep it pressed for at least
10s.
4 It is now possible to proceed to a new program-
ming procedure (see par. 7.2).
At the end of programming, reposition DIP2
to ON.
8) WARNING
1) Waiting over 10s between typing one figure and
the next causes the entry to be cancelled, and
therefore it must be repeated.
2) The acoustic signal can emit 3 types of sounds:
brief single sound
long sound
brief continuous sound = error (function not valid)
3) After consecutive entry of 5 invalid codes, the
acoustic signal emits the error sound for 60s,
during which time no other attempts at access
can be made. Any further incorrect code causes
other error signals to be emitted, with consequent
waiting time.
4) Record the code numbers entered, especially in
the case of installations having numerous access
codes. The table in Fig. 5 can be filled in and
given to the user. Keep these instructions and
the access codes in a safe place which is only
known to authorised persons.
9) MAINTENANCE
Installation maintenance must exclusively be
carried out by qualified personnel.
10) DISPOSAL
ATTENTION: disposal should only be carried
out by qualified personnel.
Materials must be disposed of in conformity with
the current regulations.
In case of disposal, the system components do
not entail any particular risks or danger. In case
of recovered materials, these should be sorted out
by type (electrical components, copper, aluminium,
plastic etc.).
The descriptions and illustrations contained
in the present manual are not binding. The
10 - SELETTO- Ver. 05
INSTALLATION MANUAL
= number entered
= Enter (0+8) typed
Company reserves the right to make any alte-
rations deemed appropriate for the technical,
manufacturing and commercial improvement of
the product, while leaving its essential features
unchanged, at any time and without undertaking
to update the present publication.