Installation Procedure; Spout Installation - Toto GUINEVERE TB970S Manual De Instrucciones

INSTALLATION PROCEDURE

1. Spout Installation

Make sure water supply is turned off.
After applying the fi nal fi nish, remove the plug from the
spout shank.
Loosen set screw on the back of the spout.
Remove the fi nish desk adapter.
Thread the fi nish deck adapter onto the rough deck adapter.
Carefully insert the spout onto the fi nish deck adapter.
Secure the spout with set screw
Spout unit
Set Screw
Spout shank
Finish deck
adapter
Finish deck
Gasket
Rough deck adapter
4